Skip to content

Concrete Test Report

Date :10/02/2023
Project No :2023C136
Client Company :Excellere
Arrival Time :10/02/2023 8:30
Onsite Hours :05:00
Name of the Project :Big Creek Boardwalks
Project Location :Alpharetta
Weather :sunny
Departure Time :10/02/2023 13:30
ASEC Technician Name :Aminullah Azimi

Concrete Placement Information

Location(S): N/A
Testing: A Set of concrete specimens (6 per set) were cast during the cast-in-place concrete pour at the above referenced location, in accordance with ASTM C31. The specimen will remain on site for the initial 24-48 hrs curing.
Compliance:

Field placement of concrete appeared to be in accordance with the project specifications (i.e., slump, temperature, etc) (refer to remarks below)

Deviations and/or noncompliances were noted during the field placement (refer to remarks below)
Specimen
Pick Up: A Sets of concrete specimens/ 6 specimen per set were picked up & transported to AS Engineering and Consulting LLC (ASEC) for curing and testing in accordance with ASTM C39, C670/1231
Field Curing: Specimen were stored for the initial 24 hours.
Near the poured structure
In an insulated curing box
Other
Remarks: batch to placement time exceeded from specified time limit.

Field Test Data

Set Number :A
Date Sampled :10/02/2023
Sampled By :Aminullah Azimi
Contractor :Excellere
Truck Number :1821
Time Batched :9:30
Location of Placement :from pile 8 to pile 12, Mansell Rd
Number of samples cast :6
Ambient Temperature (°f) :77
Slump (in.) :5
Water added (gal.) :15
Laboratory Number :A
Time Sampled :10:10
Weather Condition :sunny
Concrete Supplier :Thomas
Mix ID :408003 FA Class D
Quantity of Load (cu. yd.) :9
Sample Cast :A
Specified Strength :4000 psi
Concrete Temperature(°f) :78
Air Content (%) :3.5
Unit Weight (pcf) :N/A

Strength Test Results

Specimen Number Scheduled Test Date Date Tested Age (days) Dia(in.) Area (sq in.) Maximum Loads (lbf) Strength (lbs) % Design Strength Type of Fracture
A 10/05/2023 10/02/2023 0 4000 Infinity Infinity

UNLESS OTHERWISE SPECIFIED, TESTS WERE PERFORMED IN ACCORDANCE WITH ASTM TEST METHODS C31, C39, C138, C143, C173, AND C1064. FRACTURE TYPE INDICATED BY NUMBER.

(Type 1) Cone (Type 2) Cone-split (Type 3) Vertical (Type 4) Shear (Type 5) Edge Fracture (Type 6) Pointed

Technician Signature / DateAminullah Azimi, October 2, 2023
Reviewer Name / DateKenneth Mosman, October 08, 2023