- Home
- Concrete Test Report Report ID: 80414
- Edit Download Report
Concrete Test Report
Date :04/22/2025
Project No :2024C213
Client Company :WDG
Arrival Time :04/22/2025 08:30
Onsite Hours :08:30
Name of the Project :Covington Town Center PH II
Project Location :Covington, GA
Weather :
Departure Time :04/22/2025 17:00
ASEC Technician Name :Solomon Cherie
Concrete Placement Information
Location(S):
N/A
Testing:
1 Set of concrete specimens (5 per set) were cast during the cast-in-place concrete pour at the above referenced location, in accordance with ASTM C31. The specimen will remain on site for the initial 24-48 hrs curing.
Compliance:
Field placement of concrete appeared to be in accordance with the project specifications (i.e., slump, temperature, etc) (refer to remarks below)
Deviations and/or noncompliances were noted during the field placement (refer to remarks below)
Specimen
Pick Up: 1 Sets of concrete specimens/ 5 specimen per set were picked up & transported to AS Engineering and Consulting LLC (ASEC) for curing and testing in accordance with ASTM C39, C670/1231
Pick Up: 1 Sets of concrete specimens/ 5 specimen per set were picked up & transported to AS Engineering and Consulting LLC (ASEC) for curing and testing in accordance with ASTM C39, C670/1231
Field Curing:
Specimen were stored for the initial 24 hours.
Near the poured structure
In an insulated curing box
Other
Remarks:
Concrete temp = 78 degrees
Ambient temp = 71 degrees
Slump = 7"
Unit Weight = 138.5 pcf
Air Content = 1.3%
12 spread footings.
Field Test Data
Set Number :1
Date Sampled :04/22/2025
Sampled By :Solomon Cherie
Contractor :N/A
Truck Number :N/A
Time Batched :N/A
Location of Placement :12 column footings
Number of samples cast :5
Ambient Temperature (°f) :71
Slump (in.) :7
Water added (gal.) :N/A
Laboratory Number :N/A
Time Sampled :N/A
Weather Condition :N/A
Concrete Supplier :N/A
Mix ID :N/A
Quantity of Load (cu. yd.) :N/A
Sample Cast :1
Specified Strength :N/A
Concrete Temperature(°f) :78
Air Content (%) :1.3
Unit Weight (pcf) :N/A
Strength Test Results
| Specimen Number | Scheduled Test Date | Date Tested | Age (days) | Dia(in.) | Area (sq in.) | Maximum Loads (lbf) | Strength (lbs) | % Design Strength | Type of Fracture |
|---|
UNLESS OTHERWISE SPECIFIED, TESTS WERE PERFORMED IN ACCORDANCE WITH ASTM TEST METHODS C31, C39, C138, C143, C173, AND C1064. FRACTURE TYPE INDICATED BY NUMBER.
(Type 1) Cone (Type 2) Cone-split (Type 3) Vertical (Type 4) Shear (Type 5) Edge Fracture (Type 6) Pointed
Technician Signature / DateSolomon Cherie, April 22, 2025
Reviewer Name / DateKenneth Mosman, May 01, 2025