Daily Field Report
As requested, an ASEC Inspector was present at the above referenced site for the purpose of observing the placement of structural fill in the areas below.
- in the area of lots 434 through 439 approximate size 25 feet by 200 feet. The fill placed today at elevations between approximately -2 feet and -0 feet below finished grade
- In the area of lots 406 through 408 approximate size 25 feet by 110 feet. The fill placed today at elevations between approximately -4 feet and -2 feet below finished grade
Based on review of guidelines for fill placement, the required compaction for structural fill at the above mentioned area is 95% of standard Proctor.
Based on visual observation and field testing, the fill was placed in 8 to 12 inch thick lifts and compacted using a CAT 815F sheepsfoot compactor(weight; 45,757 lbs.).
See attached density test results for more details.
ASEC recommends sealing of the surface of placed fill from inclement weather and maintain the positive drainage.
The contractor was notified about results.