Skip to content

Concrete Test Report

Date :02/21/2024
Project No :2023C195
Client Company :Toll Bros. Inc.
Arrival Time :02/21/2024 7:00
Onsite Hours :08:30
Name of the Project :Kimbal Bridge Tract
Project Location :Alpharetta
Weather :sunny
Departure Time :02/21/2024 15:30
ASEC Technician Name :Aminullah Azimi

Concrete Placement Information

Location(S):
Testing: A Set of concrete specimens (5 Cylinders per set) were cast during the cast-in-place concrete pour at the above referenced location, in accordance with ASTM C31. The cylinders will remain on site for the initial 24-48 hrs curing.
Compliance:

Field placement of concrete appeared to be in accordance with the project specifications (i.e., slump, temperature, etc) (refer to remarks below)

Deviations and/or noncompliances were noted during the field placement (refer to remarks below)

Cylinders
Pick Up:
A Sets of concrete cylinders/ 5 cylinders per set were picked up & transported to AS Engineering and Consulting LLC (ASEC) for curing and testing in accordance with ASTM C39, C670/1231
Field Curing: Cylinders were stored for the initial 24 hours
Near the poured structure
In an insulated curing box
Other
Remarks:

Field Test Data

Set Number :A
Date Sampled :02/21/2024
Sampled By :Aminullah Azimi
Contractor :
Truck Number :1503
Time Batched :7:25
Location of Placement :retaining wall 7 footing
Number of samples cast :5
Ambient Temperature (°f) :44
Slump (in.) :7
Water added (gal.) :15
Laboratory Number :A
Time Sampled :8:20
Weather Condition :sunny
Concrete Supplier :Thomas
Mix ID :301-1FS
Quantity of Load (cu. yd.) :9
Sample Cast :A
Specified Strength :3000
Concrete Temperature(°f) :55
Air Content (%) :1.5

Strength Test Results

Specimen Number Age (days) Date Tested Dia(in.) Area (sq in.) Maximum Loads (lbs) Strength (lbs) % Design Strength Type of Fracture
1 7 02/28/2024 4
1 7 02/28/2024 4
3 27.958333333333332 03/20/2024 4
4 27.958333333333332 03/20/2024 4
5 89.95833333333333 05/21/2024 4

UNLESS OTHERWISE SPECIFIED, TESTS WERE PERFORMED IN ACCORDANCE WITH ASTM TEST METHODS C31, C39, C138, C143, C173, AND C1064. FRACTURE TYPE INDICATED BY NUMBER.

(Type 1) Cone (Type 2) Cone-split (Type 3) Vertical (Type 4) Shear (Type 5) Edge Fracture (Type 6) Pointed

Technician Signature / DateAminullah Azimi, February 21, 2024
Reviewer Name / DateKenneth Mosman, March 17, 2024